Pup joint
A pup joint is a short casing or tubing used for handling production tubing assemblies and for spacing out full-length tubing and casing strings. Pup joints are also known as “sub saver” and “pup”.
These are easy to handle and use required to their shorter length. They always provide similar performance as the tubing casing drill pipe. Pup joints have varying tubing lengths. Casing also used to adjust the production string length as possible to the required value. We also provide different thread sizes and thread types combinations of pup joints. Made from the highest standard API tubing. DIC Oil Tools are reliable Pup joints Supplier. Pup joints are a mandatory part of equipment in almost every well. Pup joint also used to balance the bottom of downhole tools.
Features of pup joints:
1. It comes in different types of thread and sizes.
2. Pup joints are complies with the highest quality API 5CT.
3. Some types of pup joints are depending on thread types.
Applications of pup joints:
1. Pup joints commonly used as integral members of the tubing string.
2. Also used to space out the distance between the tubing and casing.
Tubing Pup Joint
We are a Tubing Pup Joints Suppliers and Exporters in the United Arab Emirates. Tubing is a Part of the pup joint. Tubing Pup Joint made according to API 5CT specifications. A single pipe length, used to provide a conduct through oil and gas that produced from a wellbore. Tubing Pup joints are basically around 30 ft and 9 meters long with a thread connection on each end.
DIC Tubing Pup Joints, made out of seamless tubing and machined to final proportions, but each piece marked with a distinctive job number fully traceable. We supply Tubing Pup Joint of all sizes, grades, and thread profiles to meet any custom requirements. All Products have Passed the ISO certification and API certifications.
DIC, highly appreciated among our clients for providing the best quality Pup Joints and other Oilfield Equipment. DIC products made from the best quality material. Standard and non-Standard sizes are available with customer-specific requirements.
What is a Tubing?
Tubing is used for numerous things in many industries. It is likewise very long-lasting, however, it usually needs treatment and a coating applied over it to make it more durable as well as rust-resistant. Tubing Pup Joints frequently used in oil wells for oil recovery, acid fracturing, water injection, and gas production. Metal tubes, constructed of metals such as aluminum, bronze, copper, steel, and stainless steel. Plastic tubing can be made from polyethylene, polyamides, and polyvinyl chloride, among others. Rubber tubing, made of synthetic stuff such as silicone. It can also made of many dissimilar materials and be either flexible or hard.
Production of Tubing:
The third face of the wellbore is tubing. The tubing pup joint transports the oil and gas from deep in the well surface. Oil and gas sometimes rise to the surface on their own; normally, pumps needed to bring the fluids to the surface. Tubing is obviously a smaller diameter than the casing except for the 4 and a half inch diameter. An outer diameter of the tubing pup joint, 114.3 mm, which is considered a threshold and can be either casing or tubing. In the production of tubing that anything larger is called casing, anything smaller is called tubing.
Usage of tubing Pup Joints:
Drill a well and Fix it the well, and then put Tubing Pup Joints in the oil string casing to extract oil and gas to the ground. Below the surface pressure is not sufficient, and water can injected into the well through the tubing pup joint. In the procedure of heavy oil thermal recovery, steam shall be injected through an insulated tubing pup joint. The later period of good drilling, expanded the production of oil or gas wells. These required inputs of acidification and fracturing media or solidification into the oil or gas coating. The medium and solidification, transported all over the short tubing section.
The appearance of Tubing pup joints is divided into five types:
1. Thickening without thickening short section: The same specification at both ends, one end of the tubing is a short pipe connected with thickening tubing. The other end of the tubing is not connected with the thick of the tubing.
2. Thicker outer diameter tapered section: The different specifications at both ends, one end of the tubing short pipe is connected to a large outer thick tubing, and the other end is connected to a small size tubing.
3. Thicker outer thickening short section: Same specifications at both ends, one end part of the tubing short pipe connected to the outer thick tubing, the other end connected to the same specifications thick tubing.
4. The same diameter short section: The same specifications at both ends, one end of the tubing pipe has short joints without thickening tubing or special threaded tubing.
5. Not thickened tapered ends: The different specifications at both ends, one end of the tubing nipple is connected with a large gauge non-thickened tubing. The other end connected with a small gauge tubing.
Features of tubing pup joint:
- The tubing pup joint has large mechanical strength and so good comprehensive performance. because
- Tubing pup joint processed by a special CNC machine tool. DIC Tubing Pup Joints are provide high accuracy, reliable service, and long life.
- Tubing pup joint has a low cost. It can easily threaded between each other and repaired easily.
- Tubing Pup Joint comes in different thread sizes and types.
